Pulsed electric field treatment for preservation of Chlorella suspensions and retention of gelling capacity.

Pulsed electric field (PEF) processing has emerged as an alternative to thermal pasteurization for the shelf-life extension of heat-sensitive liquids at industrial scale. It offers the advantage of minimal alteration in physicochemical characteristics and functional properties. In this study, a pilot-scale continuous PEF processing (Toutlet < 55 °C) was applied to microalgae Chlorella vulgaris (Cv) suspensions (pH = 6.5), which was proposed as a functional ingredient for plant-based foods. Cv suspensions were inoculated with three distinct food spoilage microorganisms (Pseudomonas guariconensis, Enterobacter soli and Lactococcus lactis), isolated from the Cv biomass. PEF treatments were applied with varying electric field strength Eel of 16 to 28 kV/cm, pulse repetition rate f of 100 to 140 Hz, with a pulse width τ of 20 µs and an inlet product temperature Tin of 30 °C. The aim was to evaluate the PEF-induced microbial reduction and monitor the microbial outgrowth during a 10-day cold storage period (10 °C). Maximum inactivation of 4.1, 3.7 and 3.6 logs was achieved (28 kV/cm and 120 Hz) for the investigated isolates, respectively. Under these conditions, the critical electric field strengths Ecrit, above which inactivation was observed, ranged from 22.6 to 24.6 kV/cm. Moreover, repeated PEF treatment resulted in similar inactivation efficiency, indicating its potential to enhance shelf-life further.

Effect of Process Variables and Ingredients on Controlled Protein Network Creation in High-Moisture Plant-Based Meat Alternatives.

The market has observed a rapid increase in the demand for plant-based foods as an alternative to animal meat products. Technologies such as high-moisture extrusion (HME) have the potential to develop anisotropic structures using alternative protein ingredients. This article discusses the different possible mechanisms responsible for structure formation and the effect of extrusion process parameters and outlines the recent advances in the long cooling dies (LCDs) used for meat alternative development. The role of different protein ingredients and the impact of combining them with other biopolymers were also evaluated. The underlying mechanism behind anisotropic structure formation during HME is a synergistic effect, with substantial dependence on the source of ingredients and their processing background. Formulation including proteins derived from plants, insects, animals, and microalgae with other biopolymers could pave the way to develop structured meat alternatives and fill nutritional interstices. Dynamic or rotating annular gap cooling dies operating at freely controllable shear and static annular gap dies are recent developments and assist to produce layered or fibrous structures. The complex chemical sites created during the HME of plant protein favour flavour and colour retention. This paper summarises the recent information published in the scientific literature and patents, which could further help researchers to fill the present knowledge gaps.

Rework Potential of Soy and Pea Protein Isolates in High-Moisture Extrusion.

High-moisture extrusion (HME) is an effective process to make fibrous products that can be used as meat analogues. In this study, the effect of extrusion of already extruded products (i.e., re-extrusion) was tested with the aim to explore the potential of rework in HME. The rework of material is important because it is a route to reduce waste, which is always produced, for example during the start or at the end of a production run. Pea and soy protein isolates (PPI and SPI) were first extruded, then freeze-dried and ground, and extruded again. The visual and textural properties of the fibrous products were evaluated. Also, the rheological properties, solubility, and water-holding capacity (WHC) of the ingredients and the products after the first and second extrusion were quantified. The obtained freeze-dried powders after the first HME cycle had a reduction in solubility of 15% for PPI and 74% for SPI. Furthermore, WHC was reduced by 65% and 17% for PPI and SPI, respectively. After the second HME cycle, the reduction in solubility and WHC was augmented to 22% and 90% for PPI, and 79% and 63% for SPI. No effect on stock and loss moduli after heating and cooling were found, even after two HME cycles. SPI fibrous products did not differ in cutting strength, anisotropy index, or visual appearance after re-extrusion. Only, a decrease in hardness was detected, from 62.0 N to 51.1 N. For PPI, re-extrusion did reduce the cutting force and hardness but not the anisotropy index. It was concluded that even though HME induces a loss of solubility and WHC, this did not affect the fibrous texture formation of the protein. This means that the texture formed during HME does not depend on the process history and that rework is thus possible for fibrous products.

Flavor-protein interactions for four plant proteins with ketones and esters.

The interaction between flavors and proteins results in a reduced headspace concentration of the flavor, affecting flavor perception. We analyzed the retention of a series of esters and ketones with different chain lengths (C4, C6, C8, and C10) by protein isolates of yellow pea, soy, fava bean, and chickpea, with whey as a reference. An increase in protein concentration led to a decrease in flavor compound in the headspace as measured with atmospheric pressure chemical ionization time-of-flight mass spectroscopy (APCI-TOF-MS). Flavor retention was described with a flavor-partitioning model. It was found that flavor retention could be well predicted with the octanol-water partitioning coefficient and by fitting the hydrophobic interaction parameter. Hydrophobic interactions were highest for chickpea, followed by pea, fava bean, whey, and soy. However, the obtained predictive model was less appropriate for methyl decanoate, possibly due to its solubility. The obtained models and fitted parameters are relevant when designing flavored products with high protein concentrations.

Dietary Modulation of the Human Gut Microbiota and Metabolome with Flaxseed Preparations.

Flaxseeds are typically consumed either as whole flaxseed, ground flaxseed, flaxseed oil, partially defatted flaxseed meal, or as a milk alternative. They are considered a rich source of vitamins, minerals, proteins and peptides, lipids, carbohydrates, lignans, and dietary fiber, which have shown hypolipidemic, antiatherogenic, anticholesterolemic, and anti-inflammatory property activity. Here, an in vitro batch culture model was used to investigate the influence of whole milled flaxseed and partially defatted milled flaxseed press cake on the gut microbiota and the liberation of flaxseed bioactives. Microbial communities were profiled using 16S rRNA gene-based high-throughput sequencing with targeted mass spectrometry measuring lignan, cyclolinopeptide, and bile acid content and HPLC for short-chain fatty acid profiles. Flaxseed supplementation decreased gut microbiota richness with Firmicutes, Proteobacteria, and Bacteroidetes becoming the predominant phyla. Secoisolariciresinol, enterodiol, and enterolactone were rapidly produced with acetic acid, butyric acid, and propionic acid being the predominant acids after 24 h of fermentation. The flaxseed press cake and whole flaxseed were equivalent in microbiota changes and functionality. However, press cake may be superior as a functional additive in a variety of foods in terms of consumer acceptance as it would be more resistant to oxidative changes.

Impact of the electric field intensity and treatment time on whey protein aggregate formation.

Whey proteins are being integrated as high-value food product ingredients due to their versatile and tunable techno-functionality. To meet high food quality and clean label expectations by consumers, electric field (EF) technologies have been proposed to open new frontiers in this field. Despite a variety of studies, it remains ambiguous which EF parameters are crucial to achieving targeted whey protein modifications. Reconstituted liquid whey protein concentrate (WPCL) and filtered, non-heat-treated liquid whey (WPL_filt) at low protein dry weight concentrations (0.4% wt/wt) were exposed to microsecond pulsed electric field (µsPEF) treatments at EF intensities between 1.25 and 12.5 kV/cm, pulse repetition frequencies between 0.38 and 85 Hz, and pulse lengths set to 10 or 100 µs. Protein aggregations were quantified spectroscopically. We report here that aggregates formed at lower temperatures for µsPEF compared with purely thermal treatments in identical treatment geometries at similar time-temperature profiles. We suggest that the observed increase in absorbance is linked to protein migration, the isoelectric point, local deprotonation phenomena of thiol groups, and cation precipitation. The µsPEF treatment time, which is dependent on the pulse repetition frequency, pulse length, and time of process, is the main driver of the increase in absorbance. High EF intensities balanced with shorter pulse repetition frequencies to ensure similar energy inputs resulted in no aggregate formation. For WPL_filt, 12.5 kV/cm, 10 µs, 0.38 Hz (620 ± 96 kJ/kg; ± standard deviation) did not result in an increase in absorbance, whereas 1.25 kV/cm, 10 µs, 50 Hz (634 ± 57 kJ/kg) with similar time-temperature profiles increased the absorbance at a wavelength of 380 nm by a factor of 8.2 ± 1.7 compared with untreated WPL_filt. In conclusion, the treatment time seems to dominate over high EF intensities at similar energy inputs for aggregate formation and increase in absorbance.

Thermo-mechanical processing of plant proteins using shear cell and high-moisture extrusion cooking.

Consumption of plant-based meat analogues offers a way to reduce the environmental footprint of the human diet. High-moisture extrusion cooking (HMEC) and shear cell processing both rely on thermo-mechanical treatment of proteins to product fibrous meat-like products. However, the mechanisms underlying these processes are not well understood. In this review we discuss the effect of thermo-mechanical processing on the physicochemical properties and phase behavior of proteins and protein mixtures. The HMEC and shear cell processes are comparable in their basic unit operations, which are (1) mixing and hydration, (2) thermo-mechanical treatment, and (3) cooling. An often overlooked part of the extruder that could be crucial to fibrillation is the so-called breaker plate, which is situated between the barrel and die sections. We found a lack of consensus on the effect of heat on protein-protein interactions, and that the experimental tools to study protein-protein interactions are limited. The different mechanisms for structure formation proposed in literature all consider the deformation and alignment of the melt. However, the mechanisms differ in their underlying assumptions. Further investigation using novel and dedicated tools is required to fully understand these thermo-mechanical processes.

Surface Micro Discharge-Cold Atmospheric Pressure Plasma Processing of Common House Cricket Acheta domesticus Powder: Antimicrobial Potential and Lipid-Quality Preservation.

The growing world population and the need to reduce the environmental impact of food production drive the exploration of novel protein sources. Insects are being cultivated, harvested, and processed to be applied in animal and human nutrition. The inherent microbial contamination of insect matrices requires risk management and decontamination strategies. Thermal sterilization results in unfavorable cooking effects and oxidation of fatty acids. The present study demonstrates the risk management in Acheta domesticus (home cricket) powder with a low-energy (8.7-22.0 mW/cm2, 5 min) semi-direct surface micro discharge (SMD)-cold atmospheric pressure plasma (CAPP). At a plasma power density lower than 22 mW/cm2, no degradation of triglycerides (TG) or increased free fatty acids (FFA) content was detected. For mesophilic bacteria, 1.6 ± 0.1 log10 reductions were achieved, and for Enterobacteriaceae, there were close to 1.9 ± 0.2 log10 reductions in a layer of powder. Colonies of Bacillus cereus, Bacillus subtilis, and Bacillus megaterium were identified via the mass spectral fingerprint analyzed with matrix-assisted laser desorption/ionization time of flight (MALDI-TOF) mass spectrometry (MS). The spores of these Bacillus strains resisted to a plasma power density of 22 mW/cm2. Additional inactivation effects at non-thermal, practically non-oxidative conditions are supposed for low-intensity plasma treatments combined with the powder's fluidization.

In vivo Assessment of Cold Atmospheric Pressure Plasma Technology on the Bioactivity of Spirulina.

The present study challenges the in vivo assessment of cold atmospheric pressure plasma (CAPP) technology on the bioactive activity (antioxidant/antiaging and antimicrobial potential) of Spirulina powder, using Caenorhabditis elegans as an animal model. Surface microdischarge cold atmospheric pressure plasma (SMD-CAPP) treatment was 3.3 W discharge power for 7 min. C. elegans lifespan and egg laying were used as indicators of antioxidant/antiaging potential of Spirulina (1 mg/mL), when grown with Spirulina CP-treated [E_SCP] and untreated [E_S], compared with a control [E_0] (non-supplemented with Spirulina). According to our results, under both Spirulina supplemented media [E_SCP and E_S] and for the first 17 days, nematodes experienced an increase in lifespan but without significant differences (p > 0.05) between control and Spirulina CP-treated. Regarding the in vivo assay of the antimicrobial potential of Spirulina against Salmonella enterica serovar Typhimurium (infected worms), no significant differences (p > 0.05) were found between the three exposure scenarios (control [S_0]; Spirulina supplemented media [S_S]; CP-treated Spirulina supplemented media [S_SCP]). According to present results, CAPP-treatment do not influence negatively the lifespan of C. elegans but a reduction in the Spirulina antiaging potential was found. No in vivo modifications in antimicrobial activity seem to be linked to CAPP-processed Spirulina.